CasCade specializes in FDA 21 CFR part 11, HACCP and EN12830 compliant battery powered dataloggers for all kinds of applications:
- temperature: -80°C to +200°C and -230°C to +1450°C
- relative humidity: 0-100% RH
- thermocouple, Pt100, Pt1000 and thermistor sensors
- mVdc/Vdc, 4-20mA process signals
- 0-500A AC current & 120/240/480/600Vac voltage signals
- pressure & differential-pressure sensors (0-25mBar to 0-10Bar, +/- 2.5 Pa to +/- 25mBar)
- digital pulse signals: max. 100kHz
- up to 10 years of battery powered recording time
- max. pressures of 200 Bar
- ATEX certified dataloggers
For use in:
- Logistics and transport (refrigeration)
- Biomedical (vaccine & blood-sample storage and transport)
- Pharmaceutical industry
- Food & beverage production
- Room climate monitoring
- Clean room & hospital
- HVAC (commissioning, compressor & pneumatic systems monitoring, air duct differential pressure)
- Pneumatic control systems (valves, thermostats and humidistats/hygrostats)
- Process signals monitoring
- Drinking water applications
- Water treatment plants & waterlevel / borehole datalogging
- Ocean, stream & wastewater treatment
- Autoclaves
- Boilers & steamy environments
- Extreme environments
- Military use (NATO logistics & storage
USB-stick temperature & humidity dataloggers with 3 to 5 years battery-lifetime
JR-2000
Low cost and easy to use battery powered USB-stick temperature datalogger:
- temperature measurement range: -40°C to +85°C
- very long battery lifetime:
- 3 years (all conditions)
- 5+ years (typical -40°C to +40°C)
– JR-2000 brochure
– JR-2000 manual
– TrendReader software
– TrendReader manual
Tempmate-M2
Low cost and easy to use battery powered USB-stick temperature & humidity (optional) datalogger:
- temperature measurement range:
- -30°C to +70°C (internal digital sensor)
- -40°C to +90°C (external digital sensor)
- -80°C to +200°C (external Pt100 sensor)
- optional humidity measurement, range: 0-100% RH (internal/external sensor)
- recording time: up to 6 months
- battery: replaceable by customer (CR2450)
- automatic PDF & CSV report generation after inserting USB stick
- easy configuration with integrated HTML configurator
– Tempmate-M2 brochure
– Tempmate-M2 quickstart
– Tempbase-2 software for easy configuration free of charge
Miniature temperature & humidity dataloggers with up to 10 years battery-lifetime
SL50 series/SL151T robust & hygienic datalogger
low cost miniature battery-powered temperature & humidity dataloggers:
- temperature measurement range: -40°C to +140°C
- humidity measurement range: 0-100% RH
- very small size button: 17.35 x 5.89mm
- maximum number of readings: 8142
- extremely long battery lifetime: up to 10 years (non-replaceable)
- FDA 21 CFR part 11 compliance
- EN12830 compliance
- ISO UKAS 17025 traceable calibration certificate
- ATEX certified & meets EN50014 and EN50020 standards for group I (Zone 0) gas atmospheres only
- optional (re)-calibration service for existing dataloggers
SL51T and SL51T-A (incl. calibration certificate)
low cost temperature datalogger:
- temperature measurement range: -40°C to +85°C
- extremely long battery lifetime: 10 years or 1 million samples
- optional: SL51T-A version with ISO UKAS 17025 traceable calibration certificate
– SL50 series brochure
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
SL52T and SL52T-A (improved accuracy incl. calibration certificate)
improved accuracy temperature datalogger:
- temperature measurement range: -40°C to +85°C
- battery lifetime:
- approx. 1 year at 80°C
- approx. 5 years at 30°C (10 min sampling)
- see battery life calculator
- optional: SL52T-A further improved accuracy version with ISO UKAS 17025 traceable calibration certificate
– SL50 series brochure
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
SL53T and SL53T-A (improved accuracy incl. calibration certificate)
high temperature & improved accuracy datalogger:
- temperature measurement range: 0°C to +125°C
- battery lifetime:
- approx. 1 year at 80°C
- approx. 5 years at 30°C (10 min sampling)
- see battery life calculator
- optional: SL53T-A further improved accuracy version with ISO UKAS 17025 traceable calibration certificate
– SL50 series brochure
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
SL54TH and SL54TH-A (improved accuracy incl. calibration certificate)
temperature & humidity improved accuracy datalogger:
- temperature measurement range: -20°C to +85°C
- humidity measurement range: 0% to 100% RH
- battery lifetime:
- approx. 1 year at 80°C
- approx. 2 years at 30°C (10 min sampling)
- see battery life calculator
- optional: SL54TH-A further improved accuracy version with ISO UKAS 17025 traceable calibration certificate
– SL50 series brochure
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
SL55T-A (improved accuracy incl. calibration certificate)
very high temperature & improved accuracy datalogger:
- very high temperature measurement range: +15°C to +140°C
- battery lifetime:
- approx. 150 hours accumulative or 150 cycles in excess of 85°C
- see battery life calculator
- ISO UKAS 17025 traceable calibration certificate
– SL50 series brochure
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
SL56T and SL56T-A (improved accuracy incl. calibration certificate)
large memory capacity temperature & improved accuracy datalogger:
- temperature measurement range: -40°C to +85°C
- battery lifetime:
- approx. 4 years, 2 months at +20°C
- see battery life calculator
- optional: SL56T-A further improved accuracy version with ISO UKAS 17025 traceable calibration certificate
– SL56T series datasheet
– SL50 series instruction sheet
– TempIT graphical analysis datalogger software
Robust hygienic NATO stocknumber temperature datalogger with 4 years battery-lifetime
SL151T and SL151T-A (incl. calibration certificate)
robust hygienic temperature datalogger for blood & vaccines, food safety and military use:
- temperature measurement range: -30°C to +60°C
- food grade ABS construction
- totally sealed and crevice free
- battery lifetime: guaranteed 4 years at +20°C with a 10 minute sample rate
- easy to use: green light: temperature was within limits, red light: temperature was outside limits
- 10-year non-volatile memory: the data stored in the datalogger can be downloaded 10 years after the battery has failed
- unconditional 4 year warranty
- IP68 dust & waterproof rating
- NATO stock numbers:
- NSN 6685-99-336-6884 1x SL151T robust datalogger
- NSN 6685-99-265-1375 starter kit with:
- 5 pieces SL151T datalogger (without UKAS traeceable calibration certificates)
- 1 piece RS232 & USB inductive reader for reading out the SL151T datalogger
- TempIT-PRO software
- NSN 6685-99-571-7179: SL150R RS232 & USB inductive reader for reading out the SL151T datalogger
- optional: SL151T-A version with ISO UKAS 17025 traceable calibration certificate
– SL151T brochure
– SL151T instruction sheet
– TempIT graphical analysis datalogger software
Borehole water level, temperature and conductivity dataloggers with up to 10 years battery-lifetime
Long-life battery powered submersible dataloggers for measuring water level, temperature and conductivity in:
- wells
- boreholes
- drinking water applications
- wastewater
- reservoirs
- lakes & rivers
- tank monitoring
- sewage treatment
SL965 battery powered borehole water level / temperature & conductivity datalogger
High accuracy, stainless steel/titanium, submersible datalogger for measuring water level, temperature and (optional) conductivity (for drinking water applications)
- pressure measurement: 0 to 250mWC
- temperature measurement:
- -5°C to +50°C
- -5°C to +80°C
- fully self-contained, well suited for portable installations without power supplies
- weather proof: IP67
- battery lifetime: 10 years under normal use (factory replaceable)
- optional
- conductivity measurement 0 to 200mS/cm (for drinking water applications)
- USB communication interface and application software
- vented interconnection cable max. 250m)
- external power supply (9..30Vdc) on request
- ballast weight
SL966 battery powered borehole water level / temperature & conductivity internet datalogger with GSM connectivity
High accuracy, stainless steel/titanium, submersible internet datalogger for measuring water level, temperature and (optional) conductivity (for drinking water applications) with GSM connectivity.
- data on our or your own server via GSM mobile phone network accessible with any web browser.
- pressure measurement: 0 to 250mWC
- temperature measurement: -25°C to +85°C
- fully self-contained, well suited for portable installations without power supplies
- weather proof: datalogger IP68
- battery lifetime: typically 10 years. 2 x 3.6V lithium size D (batteries can be changed on-site)
- optional
- conductivity measurement 0 to 200mS/cm (for drinking water applications)
- configuration software and interface lead
- analysis software for customer hosting
- annual hosting charge per device
- vented interconnection cable max. 250m)
- ballast weight
Extreme environment temperature dataloggers with up to 10 years battery-lifetime
Long-lifetime battery-powered waterproof dataloggers for monitoring temperature in extreme environments where conventional dataloggers are not able to survive:
- -40°C to +125°C ranges
- autoclave monitoring
- boiler or steamy environments
- oceans, streams and wastewater
- food production
- lightweight aluminium or stainless steel housing
- optional NIST calibration certificate
Nautilus 85 battery powered temperature datalogger for extreme environments
Waterproof datalogger with anodized aluminium or stainless steel housing. Ideal for monitoring temperature in extreme environments where conventional dataloggers are not able to survive.
- temperature measurement: -40°C to +85°C
- fully self-contained, well suited for portable installations without power supplies
- waterproof
- battery lifetime: 10 years under normal use (factory replaceable)
- optional
- factory calibration verification and NIST certificates are available on request
- Viton (part number 21-0071) instead of EPDM (part number 21-0070) O ring
- TrendReader software and USB interface cable
– Nautilus 85 brochure
– Nautilus 85 & 135 manual
– TrendReader software
– TrendReader manual
Nautilus 135 battery powered temperature datalogger for extreme environments
Waterproof datalogger with anodized aluminium or stainless steel housing. Ideal for monitoring temperature in extreme environments where conventional dataloggers are not able to survive.
- temperature measurement: +10°C to +125°C
- fully self-contained, well suited for portable installations without power supplies
- waterproof
- battery lifetime: 3 years under normal use (factory replaceable)
- optional
- factory calibration verification and NIST certificates are available on request
- Viton (part number 21-0071) instead of EPDM (part number 21-0070) O ring
- TrendReader software and USB interface cable
– Nautilus 135 brochure
– Nautilus 85 & 135 manual
– TrendReader software
– TrendReader manual
Multi-channel temperature, humidity, process signal & pressure dataloggers with up to 10 years battery-lifetime
Multi-channel long-life battery powered temperature and process signal dataloggers for:
- 2 to 8 channels (depending on input type)
- temperature with thermocouple, Pt100, (J, K, T, R, S, B, N, E), Pt1000, thermistor and Cu/Ni sensors
- relative humidity 0-100%
- mVdc/Vdc, 4-20mA process signals
- 0-500A AC current & 120/240/480/600Vac voltage signals
- pressure & differential-pressure sensors
- digital pulse signals: max. 100kHz
SL7104 universal input 4 channel battery powered datalogger
4 channel battery powered datalogger with internal temperature and humidity measurement. Each of the 4 input types individually configurable. So a mix of signals is possible.
- internal temperature measurement: -30°C to +70°C
- internal humidity measurement: 0% to 100% RH
- external input signals (individually configurable):
- temperature:
- RTD/Pt100
- Thermocouple (J, K, T, R, S, B, N)
- Thermistors
- Cu/Ni sensors
- process signals:
- 4-20mA
- 0-10Vdc/0-1Vdc/+/- 100mVdc
- potmeter input (100 ohm to 10k ohm)
- temperature:
- 1 external digital pulse input signal (incl. pulse counter)
- battery lifetime: typical 5 years (replaceable by customer)
- TempIT-PRO readout software included (single computer)
- optional
- IP65 weatherproof enclosure
- replacement/spare battery
- replacement USB interface cable
- replacement/spare 14 way input connector
- external power supply (to increase lifetime of datalogging)
- external temperature/relative humidity sensor (not possible in combination with external power supply, share same connector)
- additional TempIT-PRO software licence
– SL7104 brochure
– SL7104 manual
– TempIT graphical analysis datalogger software
SmartReader Plus Series
2-8 channel battery powered datalogger with internal temperature measurement. Various versions available for:
- thermocouple type J, K, S, T & E (-200°C to +1450°C)
- RTD Pt100/Pt1000 (-230°C to +300°C)
- NTC thermistor (-60°C to +255°C)
- mV/V & mA process signals
- AC voltage (120/240/480/600Vac) & current (5A to 500A)
- pressure (0-25mBar to 0-10Bar)
- differential pressure (+/- 2.5Pa to +/- 25mBar)
- resistance
- 24VDC digital IO signal or dry switch contact (max. 100kHz)
general features for all models:
- battery lifetime: 10 years under normal use (factory replaceable)
- resolution: 12-bits
- sampling rate: 25 seconds to 8 hours
- sampling method: continuous (first-in, first-out) or stop when full
- dimensions: 107 x 74 x 22mm
- weight: 110g
- operating limits: -40°C to 70°C and 0 to 95% relative humidity
- magnetic backing and secure locking hole
- rugged die-cast Noryl® case
- convenient removable terminal block connector
optional:
- calibration to NIST standards
- display module
- NEMA 4X weatherproof enclosure
- TrendReader datalogger software
- external sensors and probes (see the corresponding brochure for more information)
SmartReader Plus versions
SmartReader Plus 1: temperature datalogger
- 1 internal channel: temperature: -40°C to +70°C
- 1 external channel with either:
- temperature with 10kOhm @ 25°C NTC thermistor (various ranges from -60°C to +255°C)
- resistance
- switch contact
– SmartReader Plus 1 brochure (temperature thermistor)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 2: temperature & humidity datalogger
- 2 internal channels:
- temperature: -40°C to +70°C
- humidity: 0-95% RH
- 2 external channels with EH-20A temperature & humidity probe:
- temperature: -20°C to +40°C
- humidity measurement 0-95% RH
– SmartReader Plus 2 brochure (temperature & humidity)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 3: AC current, AC voltage & temperature datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 4 external channels for current probes: various ranges from 0.5-5A up till 50-500A
- 3 external channels for voltage transformers: transformers with 120/240/480/600Vac primary and 5Vac secondary
– SmartReader Plus 3 brochure (temperature, AC current & AC voltage)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 4: pressure, temperature & relative humidity datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 1 internal pressure sensor channel: various pressure input ranges can be ordered from 0-25mBar up to 0-10Bar
- 2 external channels with EH-20A temperature & humidity probe:
- temperature: -20°C to +40°C
- humidity: 0-95% RH
– SmartReader Plus 4 brochure (temperature, humidity & pressure)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 4: LPD Low Pressure Differential & temperature datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 1 internal differential pressure sensor channel: various pressure input ranges can be ordered from +/- 2.5 Pa (special order) up to +/- 25mBar
– SmartReader Plus 4 LPD brochure (temperature & low differential pressure)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 5: very low to very high temperature datalogger:
- 1 internal channel: temperature & cold-junction: -40°C to +70°C
- 2 external channels: for temperature with thermocouple type J, K, S, T & E (ranges from -200°C to +1450°C, depending on type)
– SmartReader Plus 5 brochure (temperature 2x thermocouple)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 6: very low to very high temperature datalogger:
- 1 internal channel: temperature & cold-junction: -40°C to +70°C
- 7 external channels: for temperature with thermocouple type J, K, S, T & E (ranges from -200°C to +1450°C, depending on type)
– SmartReader Plus 6 brochure (temperature 7x thermocouple)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 7: mVdc/Vdc voltage & mA current process signals & temperature datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 7 external channels on standard model (SRP-007), a combination of various voltage and current ranges:
- 1x 0 to 2.5Vdc
- 2x 0 to 5Vdc
- 1x 0 to 10Vdc
- 1x 0 to 200mVdc
- 2x 0 to 25mAdc
- 7 external channels on other models, all of the same type:
- 7x 0 to 2.5Vdc or
- 7x 0 to 5Vdc or
- 7x 0 to 10Vdc or
- 7x 0 to 200mVdc or
- 7x 0 to 25mAdc
– SmartReader Plus 7 brochure (temperature & mV, V and mA process signals)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 8: temperature datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 7 external channels with either:
- temperature with 10kOhm @ 25°C NTC thermistor (various ranges from -60°C to +255°C)
- resistance
- switch contact
– SmartReader Plus 8 brochure (temperature 7x thermistor)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 9: 24Vdc digital pulse signal and dry switch contact signals datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 2 external channels for either:
- digital pulse signal 0-24Vdc (max. 100kHz)
- potential free dry switch contact
– SmartReader Plus 9 brochure (digital pulse & dry switch contact)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
SmartReader Plus 10: temperature datalogger:
- 1 internal channel: temperature: -40°C to +70°C
- 3 external channels with: RTD Pt100 or Pt1000 temperature: -230°C to +300°C
– SmartReader Plus 10 brochure (temperature RTD Pt100/Pt1000)
– SmartReader Plus manual
– TrendReader graphical analysis datalogger software
– TrendReader manual
