REVO-C series

• load type (specify at ordering):
  • 1 phase: 
    • resistive
    • short wave infrared (IR) lamps
    • transformer primary side coupled with:
      • resistive
      • MoSi2 heaters
      • SiC
      • UV lamp
    • MoSi2
    • SiC
  • 2 phase:
    • resistive with 3 phase star without neutral connection
    • resistive with 3 phase delta connection
    • short wave infrared (IR) lamps with 3 phase star connection
    • short wave infrared (IR) lamps with 3 phase delta connection
    • MoSi2 (extended version only)
  • 3 phase:
    • resistive with 3 phase star with neutral
    • resistive with 3 phase star or delta connection
    • short wave infrared (IR) lamps with 3 phase star connection with neutral
    • short wave infrared (IR) lamps with 3 phase delta or star connection
    • 3 phase transformer coupled with resistive load
    • 3 phase transformer coupled with cold resistance (MoSi2)
• maximum load current:
  • standard: 30-800A
  • extended version: 1100-2100A
• maximum load voltage: 480Vac, 600Vac or 690Vac
• many firing modes with/without soft start:
  • half and single cycle  soft start for infrared lamp (half cycle only). (1 phase only)
  • burst firing
  • delayed triggering (1 and 3 phase only)
  • phase angle (1 and 3 phase only)
  • zero crossing on/off
• many control modes:
  • open loop
  • voltage
  • voltage square (V2) 
  • current
  • current square (I2) 
  • power (VxI)
• Inputs:
  • 0/4-20mA
  • 0-10Vdc
  • SSR logic signal
  • 10k potentiometer
• Very easy configuration with the free APP and USB interface with free configuration software
• fuses included:
  • 30-40A: fuse and fuseholder included
  • 60-2100A: fixed fuses included
• optional
  • current limit
  • heater break alarm + SCR short circuit
  • analog output for 0/10VDC or 4-20mA retransmission
  • fieldbus module for
    • MODBUS RTU
    • 2x ProfiNET and 1x MODBUS RTU
    • ProfiBUS and MODBUS RTU
    • 2x MODBUS TCP and 1x MODBUS RTU.
  • SCADA/HMI touchpanel that can communicate with up to 6 REVO C units
    
  • PowerManager touchpanel for easy configuration, status indication and remote service of the thyristorunit (with MODBUS RTU RS-485 interface)

– REVO C series catalogue
– REVO C 1 phase 30-40A
– REVO C 1 phase 60-210A
– REVO C 1 phase 300-800A
– REVO C 1 phase 60-800A 690Vac version
– REVO C 1 phase 1100-2100A
– REVO C 2 phase 30-40A
– REVO C 2 phase 60-210A
– REVO C 2 phase 300-800A
– REVO C 2 phase 60-800A 690Vac version
– REVO C 2 phase 1100-2100A
– REVO C 3 phase 30-40A
– REVO C 3 phase 60-210A
– REVO C 3 phase 300-800A
– REVO C 3 phase 60-800A 690Vac version
– REVO C 3 phase 1100-2100A
– PowerManager User Manual
– PowerManager Engineering Manual

Click here to request a quotation for the REVO C.